NN081010 0.5IN ID x 0.625 IN OD x 0.625 IN OAL Molded Nylon 101 Sleeve Bearing
- SKU / Part Number:
- NN081010
Warning this product may contain chemicals known by the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
NN081010 0.5IN ID x 0.625 IN OD x 0.625 IN OAL Molded Nylon 101 Sleeve Bearing
NN081010
NN081010 0.5IN ID x 0.625 IN OD x 0.625 IN OAL Molded Nylon 101 Sleeve Bearing
Specifications Catalog Number: NN081010 Molded Nylon 101 Sleeve Bearings
Material Standard: Molded Nylon 101 Engineered Plastic
Tolerances
Inner Diameter Tolerance -0.000/+0.005"
Outside Diameter Tolerance-0.000/+0.005"
These low cost engineered plastic bearings have a good balance of strength and toughness. FDA approved non-toxic, molded nylon 101 bearings have good electrical properties
Max Temperature 250F
Molded Nylon 101 sleeve (plain), flange, and thrust bearings provide an economical alternative where performance characteristics and the strength of metal bearings are not required.
Standard off-the-shelf Molded Nylon 101 bearings should function satisfactorily in temperatures up to 250F.
